Skip to Main Content

Enduro-Flo® Drag Conveyors

EndurofloEnduro-Flo® Drag Conveyors For Standard or Heavy Duty Use

The Enduro-Flo® Drag Conveyors have been developed to provide the industrial user or commercial processor a rugged high capacity unit built to their job specific needs. Units of standard design are available in sizes 9" - 48" with key component differences detailed below.

Standard Model

  • Sizes 12" - 36"
  • Spring Compression Take Ups maintain constant chain tension.
  • Bend Section with AR top.
  • Optional bottom and side liners.

Heavy Duty Model

  • Sizes 16" - 48"
  • Screw Type Take Ups with ACME threads.
  • Bend Section with AR top and bottom.
  • Extra Heavy housing.
  • Replaceable AR bottom liner 3/8" thick.
  • Larger sizes for increased capacities.
  • Optional bolt in side liners.



Features and Advantages

  • Bolt on Bottom replaceable and flanged for added structural support.
  • Sprockets - flame cut, flamed hardened for wear resistance and ease of maintenance.
  • Grate Protected Inspection Ports at head and tail terminals equipped with quick release heavy-duty draw latch.
  • Removable Return Rails - bolt-in configuration reduces product carry overs and increases flight life by distributing wear across greater flight area.
  • Lifting Lugs on head and tail terminals provides for easy cover removal and maintenance.
  • Heavy Duty Dodge Pillow Block Bearings.
  • Chain - welded steel mill chain, fully heat-treated.
  • Compartmentalized for inclined applications with easy drop-in design that uses the same bolt holes as the cover.
  • Bend Sections - (up and down) to 90 degrees.

Optional Features

  • Divided Flow By-Pass Inlet.
  • Stainless Steel Construction.
  • Diaphragm Type Relief Switch/Overflow Monitor.


Visalia, California
Hammond, Indiana
Guadalajara, México
Winona, Mississippi


Screw Conveyor Corporation
700 Hoffman Street
Hammond, Indiana 46327-1894
Phone: (219) 931-1450
Fax: (219) 931-0209

Screw Conveyor Corporation © 2018, All Rights Reserved

close (X)