| Enduro-FloŽ Drag Conveyors For
Standard or Heavy Duty Use
The Enduro-FloŽ Drag Conveyors have been
developed to provide the industrial user or commercial processor a rugged high capacity
unit built to their job specific needs. Units of standard design are available in
sizes 9" - 48" with key component differences detailed below.
Standard Model
Sizes 9" - 36"
Spring Compression Take Ups maintain constant chain tension.
Bend Section with AR top.
Optional bottom and side liners.
Heavy Duty Model
Sizes 16" - 48"
Screw Type Take Ups with ACME threads.
Bend Section with AR top and bottom.
Extra Heavy housing.
Replaceable AR bottom liner 3/8" thick.
Larger sizes for increased capacities.
Optional bolt in side liners.
Gauges
Standard Conveyor size Heavy
Duty Conveyor size
9"-24"
30"-36"
16"-24"
30"-48"
Tail 12 GA. 10 GA.
10 GA
3/16" thk.
Drive 10 GA. 3/16" thk.
3/16" thk. 1/4" thk.
Trough 10 GA. 3/16" thk.
10GA. 3/16"
thk.
Interchangeable sides - 10 Gauge
Standard
Conveyor Size Heavy Duty Conveyor Size
Size 1 9", 12", 16"
16"
Size 2 18", 24"
18", 24"
Size 3 30", 36"
30", 36", 42", 48" |
Features and
Advantages
Bolt on Bottom replaceable and flanged for added
structural support.
Sprockets - flame cut, flamed hardened for wear
resistance and ease of maintenance.
Grate Protected Inspection Ports at head and tail
terminals equipped with quick release heavy-duty draw latch.
Removable Return Rails - bolt-in configuration reduces
product carry overs and increases flight life by distributing wear across greater flight
area.
Lifting Lugs on head and tail terminals provides for
easy cover removal and maintenance.
Heavy Duty Dodge Pillow Block Roller Bearings.
Chain - welded steel mill chain, fully heat-treated.
Compartmentalized for inclined applications with easy
drop-in design that uses the same bolt holes as the cover.
Bend Sections - (up and down) to 75 degrees.
Optional Features
Divided Flow By-Pass Inlet.
Stainless Steel Construction.
Diaphragm Type Relief Switch/Overflow Monitor.
|
